Wie man LiFePO4-Batterien auflädt: Ein vollständiger Leitfaden

Why Proper Charging Matters

Unlike lead-acid batteries, LiFePO4 batteries have a different charging profile. Using the wrong charger can lead to:

• Reduced cycle life
• Overcharging or undercharging issues
• Poor performance in the long run

By following the correct steps, you can enjoy over 4000 cycles and years of reliable energy storage.

Recommended Charging Voltage for LiFePO4

• Nominal Voltage (per cell): 3.2V
• Fully Charged Voltage (per cell): 3.65V
• 12V LiFePO4 battery (4 cells): 14.6V fully charged
• 24V LiFePO4 battery (8 cells): 29.2V fully charged
• 48V LiFePO4 battery (16 cells): 58.4V fully charged

⚡ Always check your Batterie-Management-System (BMS) settings to confirm the limits.

How to Charge LiFePO4 Battery

1. Use the Right Charger

Choose a LiFePO4-compatible charger. Standard lead-acid chargers are not recommended unless they have a specific LiFePO4 mode.

2. Charging Stages

LiFePO4 batteries usually require a two-stage charging process:

• Constant Current (CC): The charger supplies a steady current until voltage reaches 3.65V per cell.
• Constant Voltage (CV): Voltage is held at 3.65V per cell until the current drops.

Unlike lead-acid, no float charging is required.

3. Charging from Solar Panels

When using solar panels, make sure your MPPT solar charge controller is set to LiFePO4 parameters.

4. Charging from Alternator (RV/Car Use)

If charging via vehicle alternator, use a DC-DC charger to regulate voltage and prevent battery damage.

Best Practices for Charging LiFePO4

• ✅ Avoid charging below 0°C (32°F). Use a low-temperature cut-off BMS or a heater.
• ✅ Stop charging once the battery reaches 100% (14.6V for 12V pack).
• ✅ Store batteries at around 50% charge if unused for long periods.
• ✅ Use high-quality chargers to prevent voltage spikes.

Common Questions About Charging LiFePO4

1. Can I use a lead-acid charger for LiFePO4?
Not recommended, unless the charger has a LiFePO4 setting.

2. How long does it take to charge?
Charging time depends on charger size. Example: a 100Ah battery with a 20A charger takes about 5 hours.

3. Can I leave LiFePO4 on the charger?
Yes, but no float stage is necessary. The BMS will prevent overcharge.

Conclusion

Charging a LiFePO4 battery correctly ensures maximum performance, long lifespan, and safety. Always use a charger designed for LiFePO4, follow the correct voltage settings, and avoid extreme temperatures.

Whether you’re using LiFePO4 batteries for solar storage, RVs, or backup power, proper charging will give you years of reliable service.

WER IST ECAVIX?

ECAVIX Energy ist ein professioneller Hersteller, der sich auf innovative Lösungen für die Energiespeicherung zu Hause. Mit mehr als einem Jahrzehnt Erfahrung in der neuen Energiebranche haben wir uns verpflichtet, zuverlässige und leistungsstarke Batteriesysteme für private und leichte Mobilitätsanwendungen zu liefern.